The market for 3D printed hip and knee implants is anticipated to register a negative CAGR of 6.8% over the course of the forecast period and reach US$ 3.4 billion by 2022. The market is now valued at US$ 6.7 billion in 2032. 3D printing i.e. additive manufacturing involves a layer by layer process to create physical objects out of digital 3D blueprints.
It was mainly used for rapid prototyping in the late 1980’s. However, it has now become a next-generation technology which can produce localised, on-demand final products or even spare parts.
3D printing is possible with a range of thermoplastics, metal alloys, ceramics & various foodstuffs. It has seen an application in diverse areas like aerospace, retail, supply chain optimisation, & the medical industry. The 3D printed Hip & Knee Implants Market could dramatically improve both the effectiveness of surgery along with reducing the time taken to recover.
Request a Sample of this Report @
https://www.futuremarketinsights.com/reports/sample/rep-gb-2312
It was pioneered by Dr Susannah Clarke and has already been used in hundreds of hip & knee surgeries across the world. It uses CAT scans to create a 3D blueprint of the damaged hip or knee joint to be replaced. Surgeons can then use this to practice the operation on a computer, deciding beforehand where to make incisions or how to realign the bone. The 3D printed hip & knee implant market will help to make replacement surgery much safer & quicker in the long run.
3D printed Hip & Knee Implants Market Drivers
An ageing population in developed countries & China are expected to be the biggest driver of the 3D printed hip & knee implant market. Millions of people worldwide have to undergo either hip or knee replacement surgery every year.
It is not people above 60 years but those between ages 45-54 who have shown the largest increase in percentage terms. This is because of improved implant quality and awareness of how they improve mobility and quality of life.
Some of these initial surgeries fail due to contracting infections & patients then have to undergo another surgery to replace the implant. This has a much lower success rate & also causes significant pain & inconvenience. A second driver is that 3D printing is a minimally invasive procedure preferred by patients.
Surgeons can rehearse the operation with the help of 3D models beforehand which allows them to make smaller incisions, reduce blood loss & assures an easier recovery. The 3D printed hip & knee implant market helps to reduce costs & inefficiencies as these parts will be an exact fit for an individual patient.
3D printed Hip & Knee Implants Market Restraints
While the 3D printed hip & knee implant market has a tremendous scope with the pace at which 3D printing is advancing, there are still major challenges faced today. The first one is long term performance. 3D printed parts are inherently weaker than forged parts which are how traditional metal implants are made today.
They are stronger than cast parts, but they wear down much faster than forged parts in lab tests. The second main concern is the lack of regulation. At present, more than 70 3D printed devices have been approved by 510(k) of the U.S. FDA Act and this includes medical implants as well. While those drafts have been approved, FDA technical guidance is still some time away.
It is an open question how restrictive the guidelines will be once published. And this just pertains to the U.S as there is no governing body or standard worldwide. This means that the 3D printed hip & knee implant market will have to go through separate approvals in each country, increasing the effort and time taken by manufacturers.
Request for TOC @
https://www.futuremarketinsights.com/toc/rep-gb-2312
3D printed Hip & Knee Implants Market Key Regions
The largest 3D printed hip & knee implant market is the U.S as half of all joint replacements worldwide take place there. China is the fastest growing market. Implants are heavily regulated there as the country currently imports a majority of them.
Greater government pressure to manufacture indigenously is encouraging companies to enter the domestic 3D printed hip & knee implant market. The China Food And Drug Administration has also approved 3D printed hip plants for medical use there.
Key Players in the3D Printed Hip and Knee Implants
The 3D-printed hip and knee implants market are fragmented by prominent players present all around the globe. They are executing various marketing policies and methods to bring the 3D printed hip and knee implants market size up-ward during the forecast period.
Some of the strategies adopted by key players are acquisitions, partnerships, mergers, product launches and others to expand the 3D printed hip and knee implants market.
Some other key companies in the 3D printed hip & knee implant market are
- Medtronic
- DePuy
- 3D Systems
- Embody Orthopaedics
- Smith & Nephew
The report covers exhaustive analysis on
- Market Segments
- Market Dynamics
- Market Size
- Supply & Demand
- Current Trends/Issues/Challenges
- Competition & Companies involved
- Technology
- Value Chain
Request for Customization @
https://www.futuremarketinsights.com/customization-available/rep-gb-2312
Key Segments In 3D Printed Hip And Knee Implants Market
By Implant:
- Total Hip Replacement Implant
- Partial Hip Replacement Implant
- Revision Hip Replacement Implant
- Hip Resurfacing Implant
By Material:
- Metal on Polyethylene
- Metal on Metal
- Ceramic on Metal
- Others
By End-User:
- Hospitals
- Orthopedics Clinics
By Region:
- North America
- Latin America
- Asia Pacific
- MEA
- Europe
Check Related Links –
https://hackmd.io/@tanmay4733/H1txKXN5o
https://pastelink.net/p03xke6u
About Us
Future Market Insights (ESOMAR certified market research organization and a member of Greater New York Chamber of Commerce) provides in-depth insights into governing factors elevating the demand in the market. It discloses opportunities that will favor the market growth in various segments on the basis of Source, Application, Sales Channel and End Use over the next 10-years.
Contact Us:
Future Market Insights,
Unit No: 1602-006,
Jumeirah Bay 2,
Plot No: JLT-PH2-X2A,
Jumeirah Lakes Towers,
Dubai,
United Arab Emirates
For Sales Enquiries: sales@futuremarketinsights.com
Website: https://www.futuremarketinsights.com
LinkedIn| Twitter| Blogs
